Product Description
The 4 hole - slotted locking zinc hinge is die-cast black powder-coated zinc with a stainless steel pin. It is a higher-strength hinge that is commonly used to connect doors and plastic panels to T-slot profiles. The hinge has slotted holes to support adjustments and a ratcheting clamp handle for locking the hinge in position. It also features slot tabs to assist with alignment.
Suggested Hardware
| Per Leaf Mount to T-slot | ||||
 |
3112 | 2 | 5/16-18 x .750" Socket Head Cap Screw (SHCS) | Add to Cart |
 |
3278 | 2 | 5/16-18 Slide-in Economy T-Nut - Offset Thread | Add to Cart |
 |
11-8518 | 2 | M8 x 18.00mm Socket Head Cap Screw (SHCS) | Add to Cart |
 |
13025 | 2 | M8 Self-Aligning Slide-in T-Nut | Add to Cart |
| Per Leaf Mount to Panel LTE .250" / 6mm | ||||
 |
3117 | 2 | 5/16-18 x .875" Button Head Socket Cap Screw (BHSCS) | Add to Cart |
 |
3214 | 2 | 5/16-18 Hex Nut | Add to Cart |
 |
3260 | 2 | .349" ID Washer | Add to Cart |
 |
11-8320 | 2 | M8 x 20.00mm Button Head Socket Cap Screw (BHSCS) | Add to Cart |
 |
11-8065 | 2 | M8 Hex Nut | Add to Cart |
 |
11-6042 | 2 | 8.51mm ID Washer | Add to Cart |
| Series : | 15 Series, 40 Series |
| Material : | Zinc |
| Grade : | Die-Cast |
| Finish : | Powder Coat |
| Color : | Black |
| Process : | Die Cast |
| Max Load : | 250 Nm / 184 ft-Lbs. |
| A : | 53.00mm |
| B : | 81.60mm |
| C : | 65.00mm |
| D : | 40.00mm |
| E : | 24.00mm |
| F : | 13.00mm |
| G : | 8.30mm |
| H : | 40.00mm |
| J : | 14.00mm |
| K : | 8.00mm |
| L : | 105.00mm |
| M : | 4.50mm |
| N : | 7.80mm |
| Weight : | 0.470000 |
